Reliability and validity of handheld structured light scanners and a static stereophotogrammetry system in facial three-dimensional surface imaging.

Several new systems for three-dimensional (3D) surface imaging of the face have become available to assess changes following orthognathic or facial surgery. Before they can be implemented in practice, their reliability and validity must be established. Our aim, therefore, was to study the intra- and inter-system reliability and validity of 3dMD (stereophotogrammetry), Artec Eva and Artec Space Spider (both structured light scanners). Intra- and inter-system reliability, expressed in root mean square distance, was determined by scanning a mannequin's head and the faces of healthy volunteers multiple times. Validity was determined by comparing the linear measurements of the scans with the known distances of a 3D printed model. Post-processing errors were also calculated. Intra-system reliability after scanning the mannequin's head was best with the Artec Space Spider (0.04 mm Spider; 0.07 mm 3dMD; 0.08 mm Eva). The least difference in inter-system reliability after scanning the mannequin's head was between the Artec Space Spider and Artec Eva. The best intra-system reliability after scanning human subjects was with the Artec Space Spider (0.15 mm Spider; 0.20 mm Eva; 0.23 mm 3dMD). The least difference in inter-system reliability after scanning human subjects was between the Artec Eva and Artec Space Spider. The most accurate linear measurement validity occurred with the Artec Space Spider. The post-processing error was 0.01 mm for all the systems. The Artec Space Spider is the most reliable and valid scanning system.

A Deep Learning Model for Markerless Pose Estimation Based on Keypoint Augmentation: What Factors Influence Errors in Biomechanical Applications?

In biomechanics, movement is typically recorded by tracking the trajectories of anatomical landmarks previously marked using passive instrumentation, which entails several inconveniences. To overcome these disadvantages, researchers are exploring different markerless methods, such as pose estimation networks, to capture movement with equivalent accuracy to marker-based photogrammetry. However, pose estimation models usually only provide joint centers, which are incomplete data for calculating joint angles in all anatomical axes. Recently, marker augmentation models based on deep learning have emerged. These models transform pose estimation data into complete anatomical data. Building on this concept, this study presents three marker augmentation models of varying complexity that were compared to a photogrammetry system. The errors in anatomical landmark positions and the derived joint angles were calculated, and a statistical analysis of the errors was performed to identify the factors that most influence their magnitude. The proposed Transformer model improved upon the errors reported in the literature, yielding position errors of less than 1.5 cm for anatomical landmarks and 4.4 degrees for all seven movements evaluated. Anthropometric data did not influence the errors, while anatomical landmarks and movement influenced position errors, and model, rotation axis, and movement influenced joint angle errors.

Cost-effective 3D documentation device in forensic medicine.

3D documentation in forensics and forensic medicine is being introduced more frequently in various institutes around the world. However, several institutes lack capacity in finances as well as staff to perform 3D documentations regularly. This technical paper aims to present a 3D documentation device that is low cost and easy to use and is a viable entry level solution for forensic medical departments. For this the small single-board computer Raspberry Pi 4 was used in conjunction with its high quality (HQ) camera module to create the 3DLamp - a flexible, low cost and easy to use documentation device. Besides a detailed description of the device this paper also presents four case examples where a 3D documentation was performed and analyses the acquired data and the created 3D models. It was found that the device returns feasible 3D models that appear usable for forensic 3D reconstructions.

Quantitate evaluation of photogrammetry with CT scanning for orbital defect.

Facial deformities can be caused by cancer, tumours, trauma, infections, congenital or acquired defects and may lead to alteration in basic functions such as communication, breathing, and mastication and aesthetic thereby affecting quality of life. Traditional processes for manufacturing maxillofacial prostheses involve complicated, time-consuming and tedious processes for the patient and the operator. Impression of the defect area, which is the one of the crucial step in fabrication of prosthesis, is the longest and most difficult process as it requires a long contact with the patient. The digital revolution is now changing the landscape of prosthetic production and making the impression making procedure simpler. Digital technology reduces patient chair side time by providing more accurate display data in less time (3-5 min) than traditional methods. Digital impressions eliminate the need for bulky impression materials and provide a more comfortable patient experience.

Exploring reliable photogrammetry techniques for 3D modeling in anatomical research and education.

In anatomical research and education, three-dimensional visualization of anatomical structures is crucial for understanding spatial relationships in diagnostics, surgical planning, and teaching. While computed tomography (CT) and magnetic resonance imaging (MRI) offer valuable insights, they are often expensive and require specialized resources. This study explores photogrammetry as an affordable and accessible approach for 3D modeling in anatomical contexts. Two photogrammetry methods were compared: conventional open-source software (Colmap) and Apple's RealityKit Object Capture. Human C3 vertebrae were imaged with a 24 MP camera, with and without a cross-polarization filter. Reconstruction times, vertex distances, surface area, and volume measurements were compared to CT scans. Results revealed that the Object Capture method surpassed the conventional approach in reconstruction speed and user-friendliness. Both methods exhibited similar vertex distance from reference mesh and volume measurements, although the conventional approach produced larger surface areas compared to CT-based models. Cross-polarization filters eliminated the need for pre-processing and improved outcomes in challenging lighting conditions. This study demonstrates that photogrammetry, especially Object Capture, as a reliable and time-efficient tool for 3D modeling in anatomical research and education. It offers accessible alternatives to traditional techniques with advantages in texture mapping. While further validation of various anatomical structures is required, the accessibility and cost-effectiveness of photogrammetry make it a valuable asset for the field. In summary, photogrammetry would have the potential to revolutionize anatomical research and education by providing cost-effective, accessible, and accurate 3D modeling. The study underscores the promise of advancing anatomical research and education through the integration of photogrammetry with ongoing improvements in user-friendliness and accessibility.

The relay graft, a tailored supplement between the nasal hump and established tip in East Asian rhinoplasty.

BACKGROUND: In East Asian individuals, the nasal bone already has sufficient height for an ideal dorsal profile, but the tip requires enhancement for a desired projection. Consequently, the gap between the intrinsic bony structure and the established nasal tip requires appropriate management. The options are either to reduce the keystone region to create a smooth bed for a conventional dorsal onlay graft or to preserve the original osseocartilaginous structures and then customize a supplementary graft. The aim of this study was to detail and validate the utilization of a relay graft, a transition graft that fills the structural gap between the upper dorsum and established tip graft. The proper application of this graft could prevent osteotomy and preserve the intrinsic dorsum. METHODS: Relay grafts were applied during rib-based rhinoplasty in East Asian patients. Three-dimensional stereophotogrammetric evaluations of the patients were performed. Anthropometric points were analyzed in a blinded fashion. Outcome variables were tip projection improvement, radix elevation, and the angulation of kyphion and pronasale. RESULTS: Fifteen female patients, ranging in age from 21 to 40 years (average 24.5 years), were included. In all cases, the relay graft was applied as one essential element for filling the structural gap. No crooked dorsal profile or visible graft was noted in all cases. Fifteen patients completed the pre- and postoperative stereophotogrammetric study. Postoperative analysis showed great improvement of tip position as well as a slight elevation of the radix, evidenced by the consistent change of kyphion/pronasale angulation and sellion elevation. CONCLUSIONS: The relay graft effectively mitigates the necessity of a disruptive dorsal reduction. It is entirely possible for East Asians to achieve a smooth dorsal profile when only the lower half of the dorsum is transitioned to the proposed tip position. LEVEL OF EVIDENCE: Level IV, case series.

Surface Reconstruction of the Pediatric Larynx via Structure from Motion Photogrammetry: A Pilot Study.

Endoscopy is the gold standard for characterizing pediatric airway disorders, however, it is limited for quantitative analysis due to lack of three-dimensional (3D) vision and poor stereotactic depth perception. We utilize structure from motion (SfM) photogrammetry, to reconstruct 3D surfaces of pathologic and healthy pediatric larynges from monocular two-dimensional (2D) endoscopy. Models of pediatric subglottic stenosis were 3D printed and airway endoscopies were simulated. 3D surfaces were successfully reconstructed from endoscopic videos of all models using an SfM analysis toolkit. Average subglottic surface error between SfM reconstructed surfaces and 3D printed models was 0.65 mm as measured by Modified Hausdorff Distance. Average volumetric similarity between SfM surfaces and printed models was 0.82 as measured by Jaccard Index. SfM can be used to accurately reconstruct 3D surface renderings of the larynx from 2D endoscopy video. This technique has immense potential for use in quantitative analysis of airway geometry and virtual surgical planning.

Capabilities of using UAVs and close range photogrammetry to determine short-term soil losses in forest road cut slopes in semi-arid mountainous areas.

The soil losses that are caused should be examined by monitoring the forest roads in the periods after they are built. In traditional soil loss determination studies that require intensive labour, due to difficulties in parcel setup, leaks from the connection points of the system, overflow of the material in the storage units and regular follow-up of the precipitation, etc., the system has its disadvantages. In this study, studies were carried out to evaluate the possibilities of using UAV and close range photogrammetry (CRP) methods, which are remote sensing techniques, and to determine the soil losses in forest road cut slopes in semi-arid mountainous areas. In addition, the advantages and disadvantages of the methods are discussed. A 100-m section of the secondary forest road was chosen as the study area. Data acquisition was carried out by UAV and CRP methods in the period of May 2020-November 2020. In the results of the study, the volumetric deformation per unit area results, a - 0.0060 m3m-2 erosion amount and a 0.0046 m3m-2 accumulation amount were determined by UAV. In addition, in the photogrammetric method, a - 0.0050 m3m-2 erosion amount and a 0.0031 m3m-2 accumulation amount were found. When both methods were compared temporally, the processes took approximately 2 times longer in the CRP method. In addition, while the ground sampling distance of DEMs and orthophotos produced with the UAV was 2 cm, it was obtained as 1 cm in the CRP method and terrestrial receptions were found to be 2 times higher resolution. According to the results obtained, the CRP method gives results that are more accurate in such studies.

Grassland vertical height heterogeneity predicts flower and bee diversity: an UAV photogrammetric approach.

The ecosystem services offered by pollinators are vital for supporting agriculture and ecosystem functioning, with bees standing out as especially valuable contributors among these insects. Threats such as habitat fragmentation, intensive agriculture, and climate change are contributing to the decline of natural bee populations. Remote sensing could be a useful tool to identify sites of high diversity before investing into more expensive field survey. In this study, the ability of Unoccupied Aerial Vehicles (UAV) images to estimate biodiversity at a local scale has been assessed while testing the concept of the Height Variation Hypothesis (HVH). This hypothesis states that the higher the vegetation height heterogeneity (HH) measured by remote sensing information, the higher the vegetation vertical complexity and the associated species diversity. In this study, the concept has been further developed to understand if vegetation HH can also be considered a proxy for bee diversity and abundance. We tested this approach in 30 grasslands in the South of the Netherlands, where an intensive field data campaign (collection of flower and bee diversity and abundance) was carried out in 2021, along with a UAV campaign (collection of true color-RGB-images at high spatial resolution). Canopy Height Models (CHM) of the grasslands were derived using the photogrammetry technique "Structure from Motion" (SfM) with horizontal resolution (spatial) of 10 cm, 25 cm, and 50 cm. The accuracy of the CHM derived from UAV photogrammetry was assessed by comparing them through linear regression against local CHM LiDAR (Light Detection and Ranging) data derived from an Airborne Laser Scanner campaign completed in 2020/2021, yielding an [Formula: see text] of 0.71. Subsequently, the HH assessed on the CHMs at the three spatial resolutions, using four different heterogeneity indices (Rao's Q, Coefficient of Variation, Berger-Parker index, and Simpson's D index), was correlated with the ground-based flower and bee diversity and bee abundance data. The Rao's Q index was the most effective heterogeneity index, reaching high correlations with the ground-based data (0.44 for flower diversity, 0.47 for bee diversity, and 0.34 for bee abundance). Interestingly, the correlations were not significantly influenced by the spatial resolution of the CHM derived from UAV photogrammetry. Our results suggest that vegetation height heterogeneity can be used as a proxy for large-scale, standardized, and cost-effective inference of flower diversity and habitat quality for bees.

Comparison of the effects on facial soft tissues produced by rapid and slow maxillary expansion using stereophotogrammetry: a randomized clinical trial.

OBJECTIVE: To compare the effects on facial soft tissues produced by maxillary expansion generated by rapid maxillary expansion (RME) versus slow maxillary expansion (SME). MATERIALS AND METHODS: Patients in the mixed dentition were included with a transverse discrepancy between the two arches of at least 3 mm. A conventional RME screw was compared to a new expansion screw (Leaf expander) designed to produce SME. Both screws were incorporated in a fixed expander. The primary outcome was the difference of the facial tissue changes in the nasal area measured on facial 3D images captured immediately before application of the expander (T0) and after one year of retention, immediately after the expander removal (T1). Secondary outcomes were soft tissue changes of other facial regions (mouth, lips, and chin). Analysis of covariance was used for statistical analysis. RESULTS: Fourteen patients were allocated to the RME group, and 14 patients were allocated to the SME group. There were no dropouts. Nasal width change showed a difference between the two groups (1.3 mm greater in the RME group, 95% CI from 0.4 to 2.2, P = 0.005). Also, intercanthal width showed a difference between treatments (0.7 mm greater in the RME group, 95% CI from 0.0 to 1.3, P = 0.044). Nasal columella width, mouth width, nasal tip angle, upper lip angle, and lower lip angle did not show any statistically significant differences. The Y-axis (anterior-posterior) components of the nasal landmark showed a statistically significant difference between the two groups (0.5 mm of forward displacement greater in the RME group, 95% CI from 0.0 to 1.2, P = 0.040). Also, Z-axis (superior-inferior) components of the lower lip landmark was statistically significant (0.9 mm of downward displacement in favor of the RME group, 95% CI from 0.1 to 1.7, P = 0.027). All the other comparisons of the three-dimensional assessments were not statistically significant. CONCLUSIONS: RME produced significant facial soft tissue changes when compared to SME. RME induced greater increases in both nasal and intercanthal widths (1.3 mm and 0.7 mm, respectively). These findings, though statistically significant, probably are not clinically relevant. Trial registration ISRCTN, ISRCTN18263886. Registered 8 November 2016, https://www.isrctn.com/ISRCTN18263886?q=Franchi&filters=&sort=&offset=2&totalResults=2&page=1&pageSize=10.

Neuroanatomy in virtual reality: Development and pedagogical evaluation of photogrammetry-based 3D brain models.

Anatomy studies are an essential part of medical training. The study of neuroanatomy in particular presents students with a unique challenge of three-dimensional spatial understanding. Virtual Reality (VR) has been suggested to address this challenge, yet the majority of previous reports have implemented computer-generated or imaging-based models rather than models of real brain specimens. Using photogrammetry of real human bodies and advanced editing software, we developed 3D models of a real human brain at different stages of dissection. Models were placed in a custom-built virtual laboratory, where students can walk around freely, explore, and manipulate (i.e., lift the models, rotate them for different viewpoints, etc.). Sixty participants were randomly assigned to one of three learning groups: VR, 3D printed models or read-only, and given 1 h to study the white matter tracts of the cerebrum, followed by theoretical and practical exams and a learning experience questionnaire. We show that following self-guided learning in virtual reality, students demonstrate a gain in spatial understanding and an increased satisfaction with the learning experience, compared with traditional learning approaches. We conclude that the models and virtual lab described in this work may enhance learning experience and improve learning outcomes.

Projection of realistic three-dimensional photogrammetry models using stereoscopic display: A technical note.

The 3D stereoscopic technique consists in providing the illusional perception of depth of a given object using two different images mimicking how the right and left eyes capture the object. Both images are slightly different and when overlapped gives a three-dimensional (3D) experience. Considering the limitations for establishing surgical laboratories and dissections courses in some educational institutions, techniques such as stereoscopy and photogrammetry seem to play an important role in neuroanatomy and neurosurgical education. The aim of this study was to describe how to combine and set up realistic models acquired with photogrammetry scans in 3D stereoscopic projections. Three donors, one dry skull, embalmed brain and head, were scanned using photogrammetry. The software used for displaying the final realistic 3D models (Blender, Amsterdam, the Netherlands) is a free software and allows stereoscopic projection without compromising the interactivity of each model. By default, the model was exported and immediately displayed as a red cyan 3D mode. The 3D projector used in the manuscript required a side-by-side 3D mode which was set up with simple commands on the software. The final stereoscopy projection offered depth perception and a visualization in 360° of each donor; this perception was noted especially when visualizing donors with different cavities and fossae. The combination of 3D techniques is of paramount importance for neuroanatomy education. Stereoscopic projections could provide a valuable tool for neuroanatomy instruction directed at clinical trainees and could be especially useful when access to laboratory-based learning is limited.

An investigation of the reproducibility of a self-selected natural feet position when standing: Implications for the assessment of upright standing posture.

BACKGROUND: Photogrammetry is often used to evaluate standing static postural alignment. Patients are often instructed to self-select a natural feet position but it's unclear whether this position can be consistently replicated across repeated assessments. OBJECTIVE: To determine whether people can replicate a self-selected natural feet position in upright standing across three sessions on different days. DESIGN: Between days test-retest reliability. SETTING: University laboratory. METHODS: Three variables - Base of Support (BoS), Foot Width (FW), Feet Opening Angle (FOA) - were measured from foot tracings of 150 participants (18-30 years) using established procedures. BoS data were assessed for systematic bias (Analysis of Variance), and absolute (Coefficient of Variation - CV%) and relative (Intraclass Correlation Coefficient - ICC) reliability. RESULTS: There was systematic bias in the BoS data across the three testing sessions. The CV% for the BoS data was 15.2%. The ICC (95% CI) for the BoS data was 0.84 (0.79-0.87). There were moderate-large correlations between the BoS and both FOA and FW respectively within each session. CONCLUSION: If clinicians want to allow patients to use their self-selected natural feet position for repeated photogrammetric assessment of their static postural alignment it would be better to standardise the position of the feet, for example, by creating a tracing of a patient's self-selected natural feet position.

Precision and accuracy of common coral reef sampling protocols revisited with photogrammetry.

The rapid decline of coral reefs calls for cost-effective benthic cover data to improve reef health forecasts, policy building, management responses and evaluation. Reef monitoring has been largely based on divers' observations along transects, and secondarily on quadrat-based protocols, video and photographic records. However, the accuracy and precision of the most common sampling approaches are not yet fully understood. Here, we compared benthic cover estimates from three common sampling protocols: Reef Check (RC), Atlantic and Gulf Rapid Reef Assessment (AGRRA) and photoquadrats (PQ). The reef cover of two contrasting sites was reconstructed with ∼450 m2 orthomosaics built with high resolution Structure-from-Motion (SfM) photogrammetry, which were used as references for comparisons among protocols. In addition, we explored sample size requirements for each protocol and provided cost-effectiveness comparisons. Our results evidenced between-reef differences in the accuracy and precision of estimates with the different protocols. The three protocols performed similarly in the reef with low macroalgal cover (<0.5%), but PQ were more accurate and precise in the reef with relatively high (∼20%) macroalgal cover. The sample size for estimating coral cover with a 20% error margin and a 0.05 significance level was lower for PQ, followed by AGRRA and RC. Considering performance, cost surrogates and equipment needs, cost-effectiveness was higher for PQ. We also discuss costs, limitations and advantages/disadvantages of SfM photogrammetry as a sampling approach for coral reef monitoring.

Accuracy of 3D facial scans: a comparison of three different scanning system in an in vivo study.

BACKGROUND: The aim of the study was to compare the accuracy and reproducibility of three different 3D facial scanning systems, relying, respectively, on stereophotogrammetry, structured light and a smartphone app and camera. METHODS: Thirty subjects have been scanned with three different facial scanning systems, stereophotogrammetry, structured light and a smartphone app and camera. Linear measurements were compared with direct anthropometries measured on the patient's face, while the study of areas (forehead, tip of the nose, chin, right and left cheek) was evaluated by overlapping scans using the Geomagic Control X program. Statistical analyses were conducted using IBM SPSS v28 software. RESULTS: The ANOVA test was used to compare linear distances and direct anthropometry measurements, revealing statically significant values for all distances investigated, especially for the Face Hunter scanner, except for the Prn-Pog' distance (p = 0.092). The three facial scans were superimposed pairwise almost the 100 per cent of the overlapping areas fell within the tolerance limits for all three comparisons analysed. The chin was the most accurately reproduced, with no differences among scanners, while the forehead proved to be the least accurately reproduced by all scanners. CONCLUSIONS: All three acquisition systems proved to be effective in capturing 3D images of the face, with the exception of the Face Hunter scanner, that produced statistically significant differences in linear measurements for the distances Tr-Na' and Zyg-Zyg with respect to direct anthropometric measurements.

UAV Photogrammetry for Estimating Stand Parameters of an Old Japanese Larch Plantation Using Different Filtering Methods at Two Flight Altitudes.

Old plantations are iconic sites, and estimating stand parameters is crucial for valuation and management. This study aimed to estimate stand parameters of a 115-year-old Japanese larch (Larix kaempferi (Lamb.) Carrière) plantation at the University of Tokyo Hokkaido Forest (UTHF) in central Hokkaido, northern Japan, using unmanned aerial vehicle (UAV) photogrammetry. High-resolution RGB imagery was collected using a DJI Matrice 300 real-time kinematic (RTK) at altitudes of 80 and 120 m. Structure from motion (SfM) technology was applied to generate 3D point clouds and orthomosaics. We used different filtering methods, search radii, and window sizes for individual tree detection (ITD), and tree height (TH) and crown area (CA) were estimated from a canopy height model (CHM). Additionally, a freely available shiny R package (SRP) and manually digitalized CA were used. A multiple linear regression (MLR) model was used to estimate the diameter at breast height (DBH), stem volume (V), and carbon stock (CST). Higher accuracy was obtained for ITD (F-score: 0.8-0.87) and TH (R2: 0.76-0.77; RMSE: 1.45-1.55 m) than for other stand parameters. Overall, the flying altitude of the UAV and selected filtering methods influenced the success of stand parameter estimation in old-aged plantations, with the UAV at 80 m generating more accurate results for ITD, CA, and DBH, while the UAV at 120 m produced higher accuracy for TH, V, and CST with Gaussian and mean filtering.

Smartphone Photogrammetric Assessment for Head Measurements.

The assessment of cranial deformation is relevant in the field of medicine dealing with infants, especially in paediatric neurosurgery and paediatrics. To address this demand, the smartphone-based solution PhotoMeDAS has been developed, harnessing mobile devices to create three-dimensional (3D) models of infants' heads and, from them, automatic cranial deformation reports. Therefore, it is crucial to examine the accuracy achievable with different mobile devices under similar conditions so prospective users can consider this aspect when using the smartphone-based solution. This study compares the linear accuracy obtained from three smartphone models (Samsung Galaxy S22 Ultra, S22, and S22+). Twelve measurements are taken with each mobile device using a coded cap on a head mannequin. For processing, three different bundle adjustment implementations are tested with and without self-calibration. After photogrammetric processing, the 3D coordinates are obtained. A comparison is made among spatially distributed distances across the head with PhotoMeDAS vs. ground truth established with a Creaform ACADEMIA 50 while-light 3D scanner. With a homogeneous scale factor for all the smartphones, the results showed that the average accuracy for the S22 smartphone is -1.15 ± 0.53 mm, for the S22+, 0.95 ± 0.40 mm, and for the S22 Ultra, -1.8 ± 0.45 mm. Worth noticing is that a substantial improvement is achieved regardless of whether the scale factor is introduced per device.

Three-dimensional evaluation of symmetry in facial palsy reanimation using stereophotogrammetric devices: A series of 15 cases.

Facial palsy can severely compromise quality of life, significantly altering the harmony and symmetry of the face, which can be restored by surgical rehabilitation. The aim of the study was the quantification of facial symmetry following facial reanimation. Fifteen consecutive adult patients were surgically treated through triple innervation for reanimation of flaccid unilateral facial paralysis (contralateral facial nerve, masseteric nerve, and hypoglossal nerve) and fascia lata graft for definition of the nasolabial sulcus. In the preoperative stage and at least 11 months after the surgical treatment, three-dimensional facial images were recorded through stereophotogrammetry in a neutral (rest) position, and with Mona Lisa and full-denture (maximum) smiles. Labial commissure inclination relative to the interpupillary axis, and a surface assessment of local facial asymmetry at rest and while smiling were obtained for the upper, middle, and lower facial thirds. The angle between the interpupillary axis and the labial commissure significantly improved in post-surgical acquisitions, regaining symmetry at rest (t-test; p < 0.001). Facial symmetry increased significantly when passing from pre-to postsurgical facial scans, from the lower to the upper facial third, and from the full smile to the rest position (ANOVA; p < 0.001). After treatment, the full smile recovered more symmetry than the other two expressions. In summary, surgical treatment significantly reduced facial asymmetry, but this reduction differed significantly among the various animations and facial thirds. The results of this study confirmed clinical findings of significant static and dynamic improvements in facial symmetry after triple innervation reanimation surgery.

Three-dimensional evaluation of social smile asymmetry in patients with unilateral impacted maxillary canine: a 3D stereophotogrammetry study.

OBJECTIVE: This study aimed to evaluate social smile asymmetry in patients with unilateral impacted maxillary canine on 3D stereophotogrammetric images. MATERIAL AND METHODS: The 3D social smile images of participants with unilateral impacted maxillary canine (n:20) and without impaction as a control group (n:20) were included. The images were recorded with a hand-held 3D stereophotogrammetry device (Fuel3D® Scanify®) and Geomagic Essentials 2 reverse engineering software were used for analyses. After the orientation process of the 3D records, the tissues around the smile area were divided into five morphological regions: cheek, upper lip lateral and medial, and lower lip lateral and medial. The deviation margins in the negative and positive directions for the 95% mesh rate and the total percentages of meshes between - 0.5- and + 0.5-mm deviations were calculated. ICC, paired samples t test, independent samples t test, and the Mann-Whitney U test were used for statistical analyses. RESULTS: In individuals with impacted canine, the amount of maximum positive deviation in the upper lip medial was 5.64 mm ± 1.46 and maximum negative deviation was - 4.6 mm ± 1.17. In the control group, mean of deviation limits for all parameters was less than 1.19 mm ± 2.62, while in individuals with unilateral impacted maxillary canine, the maximum value was 8.34 mm ± 2.23. The mesh percentage between - 0.5 and 0.5-mm deviations was over 95% in all morphological areas in the control group, while in the impacted canine group, the number of meshes within the specified deviation limits was less than 95%. CONCLUSION: Individuals with unilateral impacted maxillary canine exhibit greater asymmetry in social smile compared to the control group, with the asymmetry being most prominent near the corners of the mouth and cheeks. CLINICAL RELEVANCE: Amount of asymmetry was higher in impaction group compared to the control group in social smile. The quantification of a possible smile asymmetry due to the impacted canine is crucial for the diagnosis and treatment planning of orthodontic and/or orthognathic cases for ideal aesthetic results. Hence, smile asymmetry should not be overlooked and should be considered in diagnosis and treatment planning.

Use of 3-Dimensional Stereophotogrammetry to Detect Disease Progression in Craniofacial Morphea.

Importance: Objectively determining disease progression in craniofacial morphea (CM) is challenging, as clinical findings of disease activity are often lacking. Objective: To evaluate the utility of 3-dimensional (3D) stereophotogrammetry in detecting disease progression in CM over time. Design, Setting, and Participants: This prospective cohort study included 27 pediatric and adult patients with CM from 2 hospitals in Boston (Boston Children's Hospital and Brigham & Women's Hospital) consecutively enrolled from April 1, 2019, to March 1, 2023. Review of 3D stereophotogrammetry images and data analysis occurred from March 1 to April 1, 2023. Main Outcomes and Measures: Clinical and 3D stereophotogrammetry assessments were performed at 2- to 12-month intervals, depending on the clinical context. The 3D stereophotogrammetry images were then qualitatively rated as demonstrating no progression or definitive progression by an expert (board-certified plastic craniofacial surgeon) and nonexpert (board-certified dermatologist) in 3D stereophotogrammetry. In addition, κ coefficients were calculated for interrater reliability. Results: Of 27 patients with CM (19 female; median age, 14 [range, 5-40] years) and 3D stereophotogrammetry images obtained from a minimum of 2 time points (median, 4 [range, 2-10] images) spaced a median of 3 (range, 2-12) months apart, 10 experienced progression of their disease based on clinical assessments performed during the study period. In all cases in which clinical progression was favored, blinded qualitative assessment of 3D stereophotogrammetry images also favored progression with substantial interrater reliability (κ = 0.80 [95% CI, 0.61-0.99]). Furthermore, review of 3D stereophotogrammetry detected occult progression of asymmetry not noted on clinical examination in 3 additional patients. Conclusions and Relevance: In this prospective cohort study, blinded assessment of sequential 3D stereophotogrammetry images in patients with CM not only corroborated clinical assessment of disease progression but also detected occult progression of facial asymmetry not appreciable on clinical examination alone. Therefore, 3D stereophotogrammetry may serve as a useful adjunct to clinical examination of patients with CM over time. Future investigations are warranted to validate 3D stereophotogrammetry as an outcome measure in CM.